CFW101 - Smoke White Oak Floor Panel


A European oak top layer is bonded to the same mineral cement base used for all the Concreate floor panels.This allows for combination floors ideal for modern open plan living where living areas can be divided by surfaces rather than physical barriers. With a normal wood flooring system there must be an expansion gap wherever the wood meets an immovable obstruction such as a ceramic tiled floor. However with Concreate’s innovative new system there is no need for this gap. As a stand a lone wood floor it is perfect for underfloor heating. The panels are finished with three coats of Smoke white high solid Danish oil to match the rest of the range. View the gallery…


150 x 14 x 1900 mm | RRP: £93.49/m²

Product Specification: Download Full Data Sheet

Pack contents: 1.71 m2 with 2 panels


Smoke White Oak with 3 coats of Concreate high solid oil.


3 mm wear layer of European rustic grade oak with bevelled edge on 4 sides is bonded to a 9 mm
non-portland cement core layer with tongue and groove fitting, with a 1 mm soft wood base.

Cleaning & Maintenance:

Download Maintenance Schedule
Concreate is sealed with high solid natural oil and is water and stain resistant. For detailed advice on how to clean and maintain Concreate flooring click here…

Installation basics:

Concreate floor panels are fully bonded with a flexible adhesive on any flat and structural sub floor, and cut with a dry cut, extracted diamond tipped blade. Click here for more…

Underfloor Heating:

Concreate Smoke White Oak is ideal for installation over underfloor heating. Read more…

Latest Installations using this product